Straight onto raw jute without bleach, dye or discharge — water-based, biodegradable brilliance that never tarnishes.
Water-Based
Biodegradable
ZDHC Level 3 Compliant
Made In House
Jute
Foilstarr for Jute
Foilstarr for Jute is a water-based, biodegradable paste applied directly to raw, untreated fibre, bypassing bleaching, pre-treatment and conventional dyeing entirely, significantly reducing effluent in the process. The range spans from high-gloss to glittery finishes in 500+ colours.
Substrate
Raw and treated jute
Compliance
ZDHC Level 3 MRSL
Application
Flat bed screen, spray and knife coating
Range
500+ colours and finishes
Form
Water-based, biodegradable metallic paste
Foilstarr for Jute
Overview
Jute is in the middle of a second life. Carbon-positive, renewable and fully biodegradable, it has moved well past sacking and rustic packaging into a serious alternative to cotton and synthetics for brands with a footprint to answer for.
Foilstarr for Jute delivers a full spectrum of finishes on a single fibre — soft matte textures alongside high-gloss and glittery finishes, in more than 500 colours. Applied directly to raw, untreated fibre, it skips the water-intensive bleaching, pre-treatment and dyeing stages entirely, cutting water consumption, energy use and processing cost. In doing so, Foilstarr for Jute is able to add value to jute, repositioning it for premium market segments.
Foilstarr for Jute
The Challenge
Getting colour onto jute has always meant a trade-off. Traditional methods rely on bleaches and chemical dyes, both reliant on heavy water, energy and chemical input before the fibre is even ready to work with. Metallic finishes carry their own set of problems — traditional gold and bronze powders are solvent-based, limited to a handful of shades, and tarnish over time regardless of storage conditions.
There's a cost layered on top of all this. Pre-washing, dyeing and post-washing introduce water, energy and toxic discharge to a fibre picked precisely because it had none of that to begin with, and every stage adds its own equipment, labour and utility expense.
Foilstarr for Jute
The Solution
Foilstarr for Jute goes on raw. The paste is applied directly to untreated fibre by screen coating or spray, skipping the primer, pre-wash and post-wash stages entirely. The metallic effect is built into the paste itself, not dusted on — it resists oxidation and tarnish, holding its finish well beyond what conventional metallic powders manage. Removing the bleach and dye stages removes the discharge with them, and the chemistry meets ZDHC Level 3 MRSL conformance, the highest level in the programme, with no restricted substances used at any point.
The finish range spans soft matte, high-gloss and glittery, in more than 500 colours, and every option preserves the natural character of the fibre rather than masking it. Less processing, less waste, and considerably more creative freedom on a material that used to offer one look — the difference between a jute bag and a statement piece, backed by compliance that positions it for more premium market segments.
Foilstarr for Jute
Foilstarr for Jute
Performance Results
The process runs on infrastructure that already exists: coat or spray, air dry naturally or run textile dryers at 80–100°C, then calender under a standard heat press to lock in durability or intensify the metallic effect. Water, energy and material consumption drop against conventional dyeing at every stage. ZDHC Level 3 certification carries the output straight into export-grade supply chains without a separate compliance conversation.
Biodegradable
Fully biodegradable on a natural fibre
Toxic Discharge
No bleach, no dye, no pre- or post-wash
Tarnishing
No oxidation, no dulling — the shine outlasts the product
Customers apply it across sustainable packaging and gift bags, interior décor and wall coverings, fashion and accessories from handbags to belts and shoes, and decorative carpets and rugs — the same fibre, working in categories it never used to reach.
Foilstarr for Jute
Final thoughts
Foilstarr for Jute brings users: an expanded creative scope, meaningful value addition, and a reduced environmental burden, elevating jute to a statement piece for premium market segments.
Foilstarr for Jute
How It Runs
Raw Jute
Apply the Paste
Dry the Finish
Heat Press
Untreated fibre, no bleaching required
Screen coating or spray application
Air dry or textile dryers at 80–100°C
Calendering for durability and metallic depth
Previous Project
Next Project
Straight onto raw jute without bleach, dye or discharge — water-based, biodegradable brilliance that never tarnishes.
Water-Based
Biodegradable
ZDHC Level 3 Compliant
Made In House
Jute
Foilstarr for Jute
Foilstarr for Jute is a water-based, biodegradable paste applied directly to raw, untreated fibre, bypassing bleaching, pre-treatment and conventional dyeing entirely, significantly reducing effluent in the process. The range spans from high-gloss to glittery finishes in 500+ colours.
Substrate
Raw and treated jute
Compliance
ZDHC Level 3 MRSL
Application
Flat bed screen, spray and knife coating
Range
500+ colours and finishes
Form
Water-based, biodegradable metallic paste
Foilstarr for Jute
Overview
Jute is in the middle of a second life. Carbon-positive, renewable and fully biodegradable, it has moved well past sacking and rustic packaging into a serious alternative to cotton and synthetics for brands with a footprint to answer for.
Foilstarr for Jute delivers a full spectrum of finishes on a single fibre — soft matte textures alongside high-gloss and glittery finishes, in more than 500 colours. Applied directly to raw, untreated fibre, it skips the water-intensive bleaching, pre-treatment and dyeing stages entirely, cutting water consumption, energy use and processing cost. In doing so, Foilstarr for Jute is able to add value to jute, repositioning it for premium market segments.
Foilstarr for Jute
The Challenge
Getting colour onto jute has always meant a trade-off. Traditional methods rely on bleaches and chemical dyes, both reliant on heavy water, energy and chemical input before the fibre is even ready to work with. Metallic finishes carry their own set of problems — traditional gold and bronze powders are solvent-based, limited to a handful of shades, and tarnish over time regardless of storage conditions.
There's a cost layered on top of all this. Pre-washing, dyeing and post-washing introduce water, energy and toxic discharge to a fibre picked precisely because it had none of that to begin with, and every stage adds its own equipment, labour and utility expense.
Foilstarr for Jute
The Solution
Foilstarr for Jute goes on raw. The paste is applied directly to untreated fibre by screen coating or spray, skipping the primer, pre-wash and post-wash stages entirely. The metallic effect is built into the paste itself, not dusted on — it resists oxidation and tarnish, holding its finish well beyond what conventional metallic powders manage. Removing the bleach and dye stages removes the discharge with them, and the chemistry meets ZDHC Level 3 MRSL conformance, the highest level in the programme, with no restricted substances used at any point.
The finish range spans soft matte, high-gloss and glittery, in more than 500 colours, and every option preserves the natural character of the fibre rather than masking it. Less processing, less waste, and considerably more creative freedom on a material that used to offer one look — the difference between a jute bag and a statement piece, backed by compliance that positions it for more premium market segments.
Foilstarr for Jute
Foilstarr for Jute
Performance Results
The process runs on infrastructure that already exists: coat or spray, air dry naturally or run textile dryers at 80–100°C, then calender under a standard heat press to lock in durability or intensify the metallic effect. Water, energy and material consumption drop against conventional dyeing at every stage. ZDHC Level 3 certification carries the output straight into export-grade supply chains without a separate compliance conversation.
Biodegradable
Fully biodegradable on a natural fibre
Toxic Discharge
No bleach, no dye, no pre- or post-wash
Tarnishing
No oxidation, no dulling — the shine outlasts the product
Customers apply it across sustainable packaging and gift bags, interior décor and wall coverings, fashion and accessories from handbags to belts and shoes, and decorative carpets and rugs — the same fibre, working in categories it never used to reach.
Foilstarr for Jute
Final thoughts
Foilstarr for Jute brings users: an expanded creative scope, meaningful value addition, and a reduced environmental burden, elevating jute to a statement piece for premium market segments.
Foilstarr for Jute
Raw Jute
Apply the Paste
Dry the Finish
Heat Press
Untreated fibre, no bleaching required
Screen coating or spray application
Air dry or textile dryers at 80–100°C
Calendering for durability and metallic depth
Previous Project
Next Project
Straight onto raw jute without bleach, dye or discharge — water-based, biodegradable brilliance that never tarnishes.
Water-Based
Biodegradable
ZDHC Level 3 Compliant
Made In House
Jute
Foilstarr for Jute
Foilstarr for Jute is a water-based, biodegradable paste applied directly to raw, untreated fibre, bypassing bleaching, pre-treatment and conventional dyeing entirely, significantly reducing effluent in the process. The range spans from high-gloss to glittery finishes in 500+ colours.
Substrate
Raw and treated jute
Compliance
Application
Flat bed screen, spray and knife coating
Range
500+ colours and finishes
Form
Water-based, biodegradable metallic paste
Foilstarr for Jute
Overview
Jute is in the middle of a second life. Carbon-positive, renewable and fully biodegradable, it has moved well past sacking and rustic packaging into a serious alternative to cotton and synthetics for brands with a footprint to answer for.
Foilstarr for Jute delivers a full spectrum of finishes on a single fibre — soft matte textures alongside high-gloss and glittery finishes, in more than 500 colours. Applied directly to raw, untreated fibre, it skips the water-intensive bleaching, pre-treatment and dyeing stages entirely, cutting water consumption, energy use and processing cost. In doing so, Foilstarr for Jute is able to add value to jute, repositioning it for premium market segments.
Foilstarr for Jute
The Challenge
Getting colour onto jute has always meant a trade-off. Traditional methods rely on bleaches and chemical dyes, both reliant on heavy water, energy and chemical input before the fibre is even ready to work with. Metallic finishes carry their own set of problems — traditional gold and bronze powders are solvent-based, limited to a handful of shades, and tarnish over time regardless of storage conditions.
There's a cost layered on top of all this. Pre-washing, dyeing and post-washing introduce water, energy and toxic discharge to a fibre picked precisely because it had none of that to begin with, and every stage adds its own equipment, labour and utility expense.
Foilstarr for Jute
The Solution
Foilstarr for Jute goes on raw. The paste is applied directly to untreated fibre by screen coating or spray, skipping the primer, pre-wash and post-wash stages entirely. The metallic effect is built into the paste itself, not dusted on — it resists oxidation and tarnish, holding its finish well beyond what conventional metallic powders manage. Removing the bleach and dye stages removes the discharge with them, and the chemistry meets ZDHC Level 3 MRSL conformance, the highest level in the programme, with no restricted substances used at any point.
The finish range spans soft matte, high-gloss and glittery, in more than 500 colours, and every option preserves the natural character of the fibre rather than masking it. Less processing, less waste, and considerably more creative freedom on a material that used to offer one look — the difference between a jute bag and a statement piece, backed by compliance that positions it for more premium market segments.
Foilstarr for Jute
Foilstarr for Jute
Performance Results
The process runs on infrastructure that already exists: coat or spray, air dry naturally or run textile dryers at 80–100°C, then calender under a standard heat press to lock in durability or intensify the metallic effect. Water, energy and material consumption drop against conventional dyeing at every stage. ZDHC Level 3 certification carries the output straight into export-grade supply chains without a separate compliance conversation.
Biodegradable
Fully biodegradable on a natural fibre
Toxic Discharge
No bleach, no dye, no pre- or post-wash
Tarnishing
No oxidation, no dulling — the shine outlasts the product
Customers apply it across sustainable packaging and gift bags, interior décor and wall coverings, fashion and accessories from handbags to belts and shoes, and decorative carpets and rugs — the same fibre, working in categories it never used to reach.
Foilstarr for Jute
Final thoughts
Foilstarr for Jute brings users: an expanded creative scope, meaningful value addition, and a reduced environmental burden, elevating jute to a statement piece for premium market segments.
Foilstarr for Jute
Raw Jute
Apply the Paste
Dry the Finish
Heat Press
Untreated fibre, no bleaching required
Screen coating or spray application
Air dry or textile dryers at 80–100°C
Calendering for durability and metallic depth
Previous Project
Next Project
A finish is hard to judge on a screen.
So we’ll send you one.
Name the material and the finish. We’ll develop a sample and get it to you.
Straight onto raw jute without bleach, dye or discharge — water-based, biodegradable brilliance that never tarnishes.
Water-Based
Biodegradable
ZDHC Level 3 Compliant
Made In House
Jute
Foilstarr for Jute
Foilstarr for Jute is a water-based, biodegradable paste applied directly to raw, untreated fibre, bypassing bleaching, pre-treatment and conventional dyeing entirely, significantly reducing effluent in the process. The range spans from high-gloss to glittery finishes in 500+ colours.
Substrate
Raw and treated jute
Compliance
ZDHC Level 3 MRSL
Application
Flat bed screen, spray and knife coating
Range
500+ colours and finishes
Form
Water-based, biodegradable metallic paste
Foilstarr for Jute
Overview
Jute is in the middle of a second life. Carbon-positive, renewable and fully biodegradable, it has moved well past sacking and rustic packaging into a serious alternative to cotton and synthetics for brands with a footprint to answer for.
Foilstarr for Jute delivers a full spectrum of finishes on a single fibre — soft matte textures alongside high-gloss and glittery finishes, in more than 500 colours. Applied directly to raw, untreated fibre, it skips the water-intensive bleaching, pre-treatment and dyeing stages entirely, cutting water consumption, energy use and processing cost. In doing so, Foilstarr for Jute is able to add value to jute, repositioning it for premium market segments.
Foilstarr for Jute
The Challenge
Getting colour onto jute has always meant a trade-off. Traditional methods rely on bleaches and chemical dyes, both reliant on heavy water, energy and chemical input before the fibre is even ready to work with. Metallic finishes carry their own set of problems — traditional gold and bronze powders are solvent-based, limited to a handful of shades, and tarnish over time regardless of storage conditions.
There's a cost layered on top of all this. Pre-washing, dyeing and post-washing introduce water, energy and toxic discharge to a fibre picked precisely because it had none of that to begin with, and every stage adds its own equipment, labour and utility expense.
Foilstarr for Jute
The Solution
Foilstarr for Jute goes on raw. The paste is applied directly to untreated fibre by screen coating or spray, skipping the primer, pre-wash and post-wash stages entirely. The metallic effect is built into the paste itself, not dusted on — it resists oxidation and tarnish, holding its finish well beyond what conventional metallic powders manage. Removing the bleach and dye stages removes the discharge with them, and the chemistry meets ZDHC Level 3 MRSL conformance, the highest level in the programme, with no restricted substances used at any point.
The finish range spans soft matte, high-gloss and glittery, in more than 500 colours, and every option preserves the natural character of the fibre rather than masking it. Less processing, less waste, and considerably more creative freedom on a material that used to offer one look — the difference between a jute bag and a statement piece, backed by compliance that positions it for more premium market segments.
Foilstarr for Jute
Foilstarr for Jute
Performance Results
The process runs on infrastructure that already exists: coat or spray, air dry naturally or run textile dryers at 80–100°C, then calender under a standard heat press to lock in durability or intensify the metallic effect. Water, energy and material consumption drop against conventional dyeing at every stage. ZDHC Level 3 certification carries the output straight into export-grade supply chains without a separate compliance conversation.
Biodegradable
Fully biodegradable on a natural fibre
Toxic Discharge
No bleach, no dye, no pre- or post-wash
Tarnishing
No oxidation, no dulling — the shine outlasts the product
Customers apply it across sustainable packaging and gift bags, interior décor and wall coverings, fashion and accessories from handbags to belts and shoes, and decorative carpets and rugs — the same fibre, working in categories it never used to reach.
Foilstarr for Jute
Final thoughts
Foilstarr for Jute brings users: an expanded creative scope, meaningful value addition, and a reduced environmental burden, elevating jute to a statement piece for premium market segments.
Foilstarr for Jute
How It Runs
Raw Jute
Apply the Paste
Dry the Finish
Heat Press
Untreated fibre, no bleaching required
Screen coating or spray application
Air dry or textile dryers at 80–100°C
Calendering for durability and metallic depth
Previous Project
Next Project
Straight onto raw jute without bleach, dye or discharge — water-based, biodegradable brilliance that never tarnishes.
Water-Based
Biodegradable
ZDHC Level 3 Compliant
Made In House
Jute
Foilstarr for Jute
Foilstarr for Jute is a water-based, biodegradable paste applied directly to raw, untreated fibre, bypassing bleaching, pre-treatment and conventional dyeing entirely, significantly reducing effluent in the process. The range spans from high-gloss to glittery finishes in 500+ colours.
Substrate
Raw and treated jute
Compliance
ZDHC Level 3 MRSL
Application
Flat bed screen, spray and knife coating
Range
500+ colours and finishes
Form
Water-based, biodegradable metallic paste
Foilstarr for Jute
Overview
Jute is in the middle of a second life. Carbon-positive, renewable and fully biodegradable, it has moved well past sacking and rustic packaging into a serious alternative to cotton and synthetics for brands with a footprint to answer for.
Foilstarr for Jute delivers a full spectrum of finishes on a single fibre — soft matte textures alongside high-gloss and glittery finishes, in more than 500 colours. Applied directly to raw, untreated fibre, it skips the water-intensive bleaching, pre-treatment and dyeing stages entirely, cutting water consumption, energy use and processing cost. In doing so, Foilstarr for Jute is able to add value to jute, repositioning it for premium market segments.
Foilstarr for Jute
The Challenge
Getting colour onto jute has always meant a trade-off. Traditional methods rely on bleaches and chemical dyes, both reliant on heavy water, energy and chemical input before the fibre is even ready to work with. Metallic finishes carry their own set of problems — traditional gold and bronze powders are solvent-based, limited to a handful of shades, and tarnish over time regardless of storage conditions.
There's a cost layered on top of all this. Pre-washing, dyeing and post-washing introduce water, energy and toxic discharge to a fibre picked precisely because it had none of that to begin with, and every stage adds its own equipment, labour and utility expense.
Foilstarr for Jute
The Solution
Foilstarr for Jute goes on raw. The paste is applied directly to untreated fibre by screen coating or spray, skipping the primer, pre-wash and post-wash stages entirely. The metallic effect is built into the paste itself, not dusted on — it resists oxidation and tarnish, holding its finish well beyond what conventional metallic powders manage. Removing the bleach and dye stages removes the discharge with them, and the chemistry meets ZDHC Level 3 MRSL conformance, the highest level in the programme, with no restricted substances used at any point.
The finish range spans soft matte, high-gloss and glittery, in more than 500 colours, and every option preserves the natural character of the fibre rather than masking it. Less processing, less waste, and considerably more creative freedom on a material that used to offer one look — the difference between a jute bag and a statement piece, backed by compliance that positions it for more premium market segments.
Foilstarr for Jute
Foilstarr for Jute
Performance Results
The process runs on infrastructure that already exists: coat or spray, air dry naturally or run textile dryers at 80–100°C, then calender under a standard heat press to lock in durability or intensify the metallic effect. Water, energy and material consumption drop against conventional dyeing at every stage. ZDHC Level 3 certification carries the output straight into export-grade supply chains without a separate compliance conversation.
Biodegradable
Fully biodegradable on a natural fibre
Toxic Discharge
No bleach, no dye, no pre- or post-wash
Tarnishing
No oxidation, no dulling — the shine outlasts the product
Customers apply it across sustainable packaging and gift bags, interior décor and wall coverings, fashion and accessories from handbags to belts and shoes, and decorative carpets and rugs — the same fibre, working in categories it never used to reach.
Foilstarr for Jute
Final thoughts
Foilstarr for Jute brings users: an expanded creative scope, meaningful value addition, and a reduced environmental burden, elevating jute to a statement piece for premium market segments.
Foilstarr for Jute
Raw Jute
Apply the Paste
Dry the Finish
Heat Press
Untreated fibre, no bleaching required
Screen coating or spray application
Air dry or textile dryers at 80–100°C
Calendering for durability and metallic depth
Previous Project
Next Project
Straight onto raw jute without bleach, dye or discharge — water-based, biodegradable brilliance that never tarnishes.
Water-Based
Biodegradable
ZDHC Level 3 Compliant
Made In House
Jute
Foilstarr for Jute
Foilstarr for Jute is a water-based, biodegradable paste applied directly to raw, untreated fibre, bypassing bleaching, pre-treatment and conventional dyeing entirely, significantly reducing effluent in the process. The range spans from high-gloss to glittery finishes in 500+ colours.
Substrate
Raw and treated jute
Compliance
Application
Flat bed screen, spray and knife coating
Range
500+ colours and finishes
Form
Water-based, biodegradable metallic paste
Foilstarr for Jute
Overview
Jute is in the middle of a second life. Carbon-positive, renewable and fully biodegradable, it has moved well past sacking and rustic packaging into a serious alternative to cotton and synthetics for brands with a footprint to answer for.
Foilstarr for Jute delivers a full spectrum of finishes on a single fibre — soft matte textures alongside high-gloss and glittery finishes, in more than 500 colours. Applied directly to raw, untreated fibre, it skips the water-intensive bleaching, pre-treatment and dyeing stages entirely, cutting water consumption, energy use and processing cost. In doing so, Foilstarr for Jute is able to add value to jute, repositioning it for premium market segments.
Foilstarr for Jute
The Challenge
Getting colour onto jute has always meant a trade-off. Traditional methods rely on bleaches and chemical dyes, both reliant on heavy water, energy and chemical input before the fibre is even ready to work with. Metallic finishes carry their own set of problems — traditional gold and bronze powders are solvent-based, limited to a handful of shades, and tarnish over time regardless of storage conditions.
There's a cost layered on top of all this. Pre-washing, dyeing and post-washing introduce water, energy and toxic discharge to a fibre picked precisely because it had none of that to begin with, and every stage adds its own equipment, labour and utility expense.
Foilstarr for Jute
The Solution
Foilstarr for Jute goes on raw. The paste is applied directly to untreated fibre by screen coating or spray, skipping the primer, pre-wash and post-wash stages entirely. The metallic effect is built into the paste itself, not dusted on — it resists oxidation and tarnish, holding its finish well beyond what conventional metallic powders manage. Removing the bleach and dye stages removes the discharge with them, and the chemistry meets ZDHC Level 3 MRSL conformance, the highest level in the programme, with no restricted substances used at any point.
The finish range spans soft matte, high-gloss and glittery, in more than 500 colours, and every option preserves the natural character of the fibre rather than masking it. Less processing, less waste, and considerably more creative freedom on a material that used to offer one look — the difference between a jute bag and a statement piece, backed by compliance that positions it for more premium market segments.
Foilstarr for Jute
Foilstarr for Jute
Performance Results
The process runs on infrastructure that already exists: coat or spray, air dry naturally or run textile dryers at 80–100°C, then calender under a standard heat press to lock in durability or intensify the metallic effect. Water, energy and material consumption drop against conventional dyeing at every stage. ZDHC Level 3 certification carries the output straight into export-grade supply chains without a separate compliance conversation.
Biodegradable
Fully biodegradable on a natural fibre
Toxic Discharge
No bleach, no dye, no pre- or post-wash
Tarnishing
No oxidation, no dulling — the shine outlasts the product
Customers apply it across sustainable packaging and gift bags, interior décor and wall coverings, fashion and accessories from handbags to belts and shoes, and decorative carpets and rugs — the same fibre, working in categories it never used to reach.
Foilstarr for Jute
Final thoughts
Foilstarr for Jute brings users: an expanded creative scope, meaningful value addition, and a reduced environmental burden, elevating jute to a statement piece for premium market segments.
Foilstarr for Jute
Raw Jute
Apply the Paste
Dry the Finish
Heat Press
Untreated fibre, no bleaching required
Screen coating or spray application
Air dry or textile dryers at 80–100°C
Calendering for durability and metallic depth
Previous Project
Next Project
A finish is hard to judge on a screen.
So we’ll send you one.
Name the material and the finish. We’ll develop a sample and get it to you.
Straight onto raw jute without bleach, dye or discharge — water-based, biodegradable brilliance that never tarnishes.
Water-Based
Biodegradable
ZDHC Level 3 Compliant
Made In House
Jute
Foilstarr for Jute
Foilstarr for Jute is a water-based, biodegradable paste applied directly to raw, untreated fibre, bypassing bleaching, pre-treatment and conventional dyeing entirely, significantly reducing effluent in the process. The range spans from high-gloss to glittery finishes in 500+ colours.
Substrate
Raw and treated jute
Compliance
ZDHC Level 3 MRSL
Application
Flat bed screen, spray and knife coating
Range
500+ colours and finishes
Form
Water-based, biodegradable metallic paste
Foilstarr for Jute
Overview
Jute is in the middle of a second life. Carbon-positive, renewable and fully biodegradable, it has moved well past sacking and rustic packaging into a serious alternative to cotton and synthetics for brands with a footprint to answer for.
Foilstarr for Jute delivers a full spectrum of finishes on a single fibre — soft matte textures alongside high-gloss and glittery finishes, in more than 500 colours. Applied directly to raw, untreated fibre, it skips the water-intensive bleaching, pre-treatment and dyeing stages entirely, cutting water consumption, energy use and processing cost. In doing so, Foilstarr for Jute is able to add value to jute, repositioning it for premium market segments.
Foilstarr for Jute
The Challenge
Getting colour onto jute has always meant a trade-off. Traditional methods rely on bleaches and chemical dyes, both reliant on heavy water, energy and chemical input before the fibre is even ready to work with. Metallic finishes carry their own set of problems — traditional gold and bronze powders are solvent-based, limited to a handful of shades, and tarnish over time regardless of storage conditions.
There's a cost layered on top of all this. Pre-washing, dyeing and post-washing introduce water, energy and toxic discharge to a fibre picked precisely because it had none of that to begin with, and every stage adds its own equipment, labour and utility expense.
Foilstarr for Jute
The Solution
Foilstarr for Jute goes on raw. The paste is applied directly to untreated fibre by screen coating or spray, skipping the primer, pre-wash and post-wash stages entirely. The metallic effect is built into the paste itself, not dusted on — it resists oxidation and tarnish, holding its finish well beyond what conventional metallic powders manage. Removing the bleach and dye stages removes the discharge with them, and the chemistry meets ZDHC Level 3 MRSL conformance, the highest level in the programme, with no restricted substances used at any point.
The finish range spans soft matte, high-gloss and glittery, in more than 500 colours, and every option preserves the natural character of the fibre rather than masking it. Less processing, less waste, and considerably more creative freedom on a material that used to offer one look — the difference between a jute bag and a statement piece, backed by compliance that positions it for more premium market segments.
Foilstarr for Jute
Foilstarr for Jute
Performance Results
The process runs on infrastructure that already exists: coat or spray, air dry naturally or run textile dryers at 80–100°C, then calender under a standard heat press to lock in durability or intensify the metallic effect. Water, energy and material consumption drop against conventional dyeing at every stage. ZDHC Level 3 certification carries the output straight into export-grade supply chains without a separate compliance conversation.
Biodegradable
Fully biodegradable on a natural fibre
Toxic Discharge
No bleach, no dye, no pre- or post-wash
Tarnishing
No oxidation, no dulling — the shine outlasts the product
Customers apply it across sustainable packaging and gift bags, interior décor and wall coverings, fashion and accessories from handbags to belts and shoes, and decorative carpets and rugs — the same fibre, working in categories it never used to reach.
Foilstarr for Jute
Final thoughts
Foilstarr for Jute brings users: an expanded creative scope, meaningful value addition, and a reduced environmental burden, elevating jute to a statement piece for premium market segments.
Foilstarr for Jute
How It Runs
Raw Jute
Apply the Paste
Dry the Finish
Heat Press
Untreated fibre, no bleaching required
Screen coating or spray application
Air dry or textile dryers at 80–100°C
Calendering for durability and metallic depth
Previous Project
Next Project
Straight onto raw jute without bleach, dye or discharge — water-based, biodegradable brilliance that never tarnishes.
Water-Based
Biodegradable
ZDHC Level 3 Compliant
Made In House
Jute
Foilstarr for Jute
Foilstarr for Jute is a water-based, biodegradable paste applied directly to raw, untreated fibre, bypassing bleaching, pre-treatment and conventional dyeing entirely, significantly reducing effluent in the process. The range spans from high-gloss to glittery finishes in 500+ colours.
Substrate
Raw and treated jute
Compliance
ZDHC Level 3 MRSL
Application
Flat bed screen, spray and knife coating
Range
500+ colours and finishes
Form
Water-based, biodegradable metallic paste
Foilstarr for Jute
Overview
Jute is in the middle of a second life. Carbon-positive, renewable and fully biodegradable, it has moved well past sacking and rustic packaging into a serious alternative to cotton and synthetics for brands with a footprint to answer for.
Foilstarr for Jute delivers a full spectrum of finishes on a single fibre — soft matte textures alongside high-gloss and glittery finishes, in more than 500 colours. Applied directly to raw, untreated fibre, it skips the water-intensive bleaching, pre-treatment and dyeing stages entirely, cutting water consumption, energy use and processing cost. In doing so, Foilstarr for Jute is able to add value to jute, repositioning it for premium market segments.
Foilstarr for Jute
The Challenge
Getting colour onto jute has always meant a trade-off. Traditional methods rely on bleaches and chemical dyes, both reliant on heavy water, energy and chemical input before the fibre is even ready to work with. Metallic finishes carry their own set of problems — traditional gold and bronze powders are solvent-based, limited to a handful of shades, and tarnish over time regardless of storage conditions.
There's a cost layered on top of all this. Pre-washing, dyeing and post-washing introduce water, energy and toxic discharge to a fibre picked precisely because it had none of that to begin with, and every stage adds its own equipment, labour and utility expense.
Foilstarr for Jute
The Solution
Foilstarr for Jute goes on raw. The paste is applied directly to untreated fibre by screen coating or spray, skipping the primer, pre-wash and post-wash stages entirely. The metallic effect is built into the paste itself, not dusted on — it resists oxidation and tarnish, holding its finish well beyond what conventional metallic powders manage. Removing the bleach and dye stages removes the discharge with them, and the chemistry meets ZDHC Level 3 MRSL conformance, the highest level in the programme, with no restricted substances used at any point.
The finish range spans soft matte, high-gloss and glittery, in more than 500 colours, and every option preserves the natural character of the fibre rather than masking it. Less processing, less waste, and considerably more creative freedom on a material that used to offer one look — the difference between a jute bag and a statement piece, backed by compliance that positions it for more premium market segments.
Foilstarr for Jute
Foilstarr for Jute
Performance Results
The process runs on infrastructure that already exists: coat or spray, air dry naturally or run textile dryers at 80–100°C, then calender under a standard heat press to lock in durability or intensify the metallic effect. Water, energy and material consumption drop against conventional dyeing at every stage. ZDHC Level 3 certification carries the output straight into export-grade supply chains without a separate compliance conversation.
Biodegradable
Fully biodegradable on a natural fibre
Toxic Discharge
No bleach, no dye, no pre- or post-wash
Tarnishing
No oxidation, no dulling — the shine outlasts the product
Customers apply it across sustainable packaging and gift bags, interior décor and wall coverings, fashion and accessories from handbags to belts and shoes, and decorative carpets and rugs — the same fibre, working in categories it never used to reach.
Foilstarr for Jute
Final thoughts
Foilstarr for Jute brings users: an expanded creative scope, meaningful value addition, and a reduced environmental burden, elevating jute to a statement piece for premium market segments.
Foilstarr for Jute
Raw Jute
Apply the Paste
Dry the Finish
Heat Press
Untreated fibre, no bleaching required
Screen coating or spray application
Air dry or textile dryers at 80–100°C
Calendering for durability and metallic depth
Previous Project
Next Project
Straight onto raw jute without bleach, dye or discharge — water-based, biodegradable brilliance that never tarnishes.
Water-Based
Biodegradable
ZDHC Level 3 Compliant
Made In House
Jute
Foilstarr for Jute
Foilstarr for Jute is a water-based, biodegradable paste applied directly to raw, untreated fibre, bypassing bleaching, pre-treatment and conventional dyeing entirely, significantly reducing effluent in the process. The range spans from high-gloss to glittery finishes in 500+ colours.
Substrate
Raw and treated jute
Compliance
Application
Flat bed screen, spray and knife coating
Range
500+ colours and finishes
Form
Water-based, biodegradable metallic paste
Foilstarr for Jute
Overview
Jute is in the middle of a second life. Carbon-positive, renewable and fully biodegradable, it has moved well past sacking and rustic packaging into a serious alternative to cotton and synthetics for brands with a footprint to answer for.
Foilstarr for Jute delivers a full spectrum of finishes on a single fibre — soft matte textures alongside high-gloss and glittery finishes, in more than 500 colours. Applied directly to raw, untreated fibre, it skips the water-intensive bleaching, pre-treatment and dyeing stages entirely, cutting water consumption, energy use and processing cost. In doing so, Foilstarr for Jute is able to add value to jute, repositioning it for premium market segments.
Foilstarr for Jute
The Challenge
Getting colour onto jute has always meant a trade-off. Traditional methods rely on bleaches and chemical dyes, both reliant on heavy water, energy and chemical input before the fibre is even ready to work with. Metallic finishes carry their own set of problems — traditional gold and bronze powders are solvent-based, limited to a handful of shades, and tarnish over time regardless of storage conditions.
There's a cost layered on top of all this. Pre-washing, dyeing and post-washing introduce water, energy and toxic discharge to a fibre picked precisely because it had none of that to begin with, and every stage adds its own equipment, labour and utility expense.
Foilstarr for Jute
The Solution
Foilstarr for Jute goes on raw. The paste is applied directly to untreated fibre by screen coating or spray, skipping the primer, pre-wash and post-wash stages entirely. The metallic effect is built into the paste itself, not dusted on — it resists oxidation and tarnish, holding its finish well beyond what conventional metallic powders manage. Removing the bleach and dye stages removes the discharge with them, and the chemistry meets ZDHC Level 3 MRSL conformance, the highest level in the programme, with no restricted substances used at any point.
The finish range spans soft matte, high-gloss and glittery, in more than 500 colours, and every option preserves the natural character of the fibre rather than masking it. Less processing, less waste, and considerably more creative freedom on a material that used to offer one look — the difference between a jute bag and a statement piece, backed by compliance that positions it for more premium market segments.
Foilstarr for Jute
Foilstarr for Jute
Performance Results
The process runs on infrastructure that already exists: coat or spray, air dry naturally or run textile dryers at 80–100°C, then calender under a standard heat press to lock in durability or intensify the metallic effect. Water, energy and material consumption drop against conventional dyeing at every stage. ZDHC Level 3 certification carries the output straight into export-grade supply chains without a separate compliance conversation.
Biodegradable
Fully biodegradable on a natural fibre
Toxic Discharge
No bleach, no dye, no pre- or post-wash
Tarnishing
No oxidation, no dulling — the shine outlasts the product
Customers apply it across sustainable packaging and gift bags, interior décor and wall coverings, fashion and accessories from handbags to belts and shoes, and decorative carpets and rugs — the same fibre, working in categories it never used to reach.
Foilstarr for Jute
Final thoughts
Foilstarr for Jute brings users: an expanded creative scope, meaningful value addition, and a reduced environmental burden, elevating jute to a statement piece for premium market segments.
Foilstarr for Jute
Raw Jute
Apply the Paste
Dry the Finish
Heat Press
Untreated fibre, no bleaching required
Screen coating or spray application
Air dry or textile dryers at 80–100°C
Calendering for durability and metallic depth
Previous Project
Next Project
A finish is hard to judge on a screen.
So we’ll send you one.
Name the material and the finish. We’ll develop a sample and get it to you.